Ulwakhiwo
Izinto eziphathekayo
DIN 1.4404/AISI 316L, DIN 1.4539/AISI 904L
Monel, Inconel, Duples steel, Hastelloy alloys
Ezinye izinto ezifumanekayo xa ziceliwe.
Isihluzo sobuhle: 1 -100 microns
Iinkcukacha
| Ubalulo -I-Standard five-layer sintered mesh | ||||||||
| Inkcazo | ucolo lokucoca | Ulwakhiwo | Ukutyeba | I-Porosity | Air Permeability | Rp | Ubunzima | Uxinzelelo lwebhamuza |
| μm | mm | % | (L/min/cm²) | N/cm | kg / ㎡ | (mmH₂O) | ||
| I-SSM-F-1 | 1 | 100+400x2800+100+12/64+64/12 | 1.7 | 37 | 1.82 | 1080 | 8.4 | 360-600 |
| I-SSM-F-2 | 2 | 100+325x2300+100+12/64+64/12 | 1.7 | 37 | 2.36 | 1080 | 8.4 | 300-590 |
| I-SSM-F-5 | 5 | 100+200x1400+100+12/64+64/12 | 1.7 | 37 | 2.42 | 1080 | 8.4 | 260-550 |
| I-SSM-F-10 | 10 | 100+165x1400+100+12/64+64/12 | 1.7 | 37 | 3.08 | 1080 | 8.4 | 220-500 |
| I-SSM-F-15 | 15 | 100+165x1200+100+12/64+64/12 | 1.7 | 37 | 3.41 | 1080 | 8.4 | 200-480 |
| I-SSM-F-20 | 20 | 100+165x800+100+12/64+64/12 | 1.7 | 37 | 4.05 | 1080 | 8.4 | 170-450 |
| I-SSM-F-25 | 25 | 100+165x600+100+12/64+64/12 | 1.7 | 37 | 6.12 | 1080 | 8.4 | 150-410 |
| I-SSM-F-30 | 30 | 100+400+100+12/64+64/12 | 1.7 | 37 | 6.7 | 1080 | 8.4 | 120-390 |
| I-SSM-F-40 | 40 | 100+325+100+12/64+64/12 | 1.7 | 37 | 6.86 | 1080 | 8.4 | 100-350 |
| I-SSM-F-50 | 50 | 100+250+100+12/64+64/12 | 1.7 | 37 | 8.41 | 1080 | 8.4 | 90-300 |
| I-SSM-F-75 | 75 | 100+200+100+12/64+64/12 | 1.7 | 37 | 8.7 | 1080 | 8.4 | 80-250 |
| I-SSM-F-100 | 100 | 100+150+100+12/64+64/12 | 1.7 | 37 | 9.1 | 1080 | 8.4 | 70-190 |
Iimpawu zesihluzi sentsimbi engatyiwa yiconical sintered mesh filter
1. Ukucoca kuzinzile kwaye kufanayo: ukhuselwe ngamanqanaba aphezulu nangaphantsi kwe-wire mesh, edibene nenkqubo ye-sintering yokusasazwa kunye nokudibanisa okuqinileyo, i-mesh ye-filtration ayilula ukuyilungisa, kwaye inokufikelela ekusebenzeni okufanayo kokucoca kuzo zonke izichasiselo zokucoca, ezifanelekileyo. inkqubo eqhubekayo kunye ne-automation.
2. Amandla alungileyo: axhaswa ngumgangatho wokuqiniswa kunye noluhlu lwenkxaso, lunamandla amakhulu omatshini kunye namandla oxinzelelo.
3. Ukucutshungulwa okulula: kukulungele ukusika, ukugoba, ukunyathela, ukunweba, i-welding kunye nezinye iindlela zokucubungula, kulula ukuyisebenzisa.
4. Uluhlu olubanzi lokukhetha izinto eziphathekayo: 316L, 304, 321, njl.
5. Ukuxhatshazwa kwe-Corrosion: ngenxa yokusetyenziswa kwe-SUS316L kunye ne-304 izinto eziphathekayo, inokumelana nokugqwala okuqinileyo kwaye ifanelekile ukuhluzwa kwiindawo ze-acid-base.
6. Uluhlu olubanzi lweendawo zokusetyenziswa: lunokusetyenziswa kwiindawo zokushisa ukusuka -200 ° C ukuya ku-600 ° C.
7. Ukucoceka ngokulula: ngenxa yesimo esilungisiweyo se-mesh, ubukhulu be-pore obufanayo, iziteshi ezigudileyo kunye ezilula kunye nokusetyenziswa kwezixhobo zokucoca indawo, kulula ukuyicoca (inokucocwa ngamanzi aphikisanayo, ukunyibilika kwe-ultrasonic kunye nokubhaka kwe-filtrate, njl. .), inokusetyenziswa ngokuphindaphindiweyo, Iimpawu zobomi obude.
Uluhlu lwesicelo soluhlu lwesixhobo sokucoca intsimbi engatyiwa sintered mesh
1. Ukucoca ulwelo kunye negesi kwi-petrochemical, i-polyester, i-pharmaceutical, ukutya kunye nesiselo kunye namashishini okucoca amanzi;
2. Ukucoca okuphakathi koxinzelelo oluphezulu;Ukwahlulwa kwesanti yeoli ye-oilfield;
3. Oomatshini, iinqanawa, amafutha, ioli yokuthambisa, ioli yokuqalisa ihydraulic;
4. Inkqubo yokucoca iiseti ezipheleleyo zezixhobo zekhemikhali kushishino lweekhemikhali;
5. I-sterilization yegesi ephezulu yokushisa, unyango lwamanzi, lusetyenziselwa ukuhluzwa kweendaba ezifana namanzi kunye nomoya.
Usetyenziso
Iibhedi ezinamanzi, izihluzi ze-Nutsche, i-Centrifuges, i-Aeration ye-silos, izicelo kwi-biotechnology.
